Supreme Info About How To Start Pressure Washer

Once your pressure washer is on, turn the burner switch to “on” (this should be green).

How to start pressure washer. Move the throttle to the left (the full throttle position). Also, make sure that the water supply is turned off. 5 steps to start a pressure washing business.

Attach the garden hose given with the pressure washer to the water supply to. The pressure washer and hose will fill with water, so it is important to purge the system of excess air before starting the unit. Feel like you’re missing an important step?

To fix this, first, turn off the pressure washer and release the pressure from the hose. Open the pump by turning the knob. Then make sure that the choke is in the “closed” position.

The ignition coil is also crucial to starting the machine since it sends the voltage to the spark. Setting the engine choke at a. To get the pressure washer engine to start, repeat steps 1 through 3.

The first step is to connect the garden hose and the high pressure hose to the pump. If a pressure washer will not start, the first thing to check is the oil level. Quick steps of using craftsman pressure washer place the pressure washer on the flat surface.

A pressure washer running only on choke can be due to a clogged carburetor, air leak, use of wrong fuel, faulty spark plug, or defective fuel line. 4400 psi, 4.2 gpm, 13 hp (420cc) commercial duty pressure washer carb. Ensure that the pressure washer is turned off and all the hoses are disconnected.